Refitting The Battery - Ducati SCRAMBLER 800 Workshop Manual

Hide thumbs Also See for SCRAMBLER 800:

Table of Contents

Disconnect the battery cables first from the negative pole (5) then from the positive one (6). Remove the

battery (2).

Insulate the ground cable ends you just removed to prevent them from touching the motorcycle.

Refitting the battery

Position the battery (2). Connect the positive pole by means of screw (6) by tightening it to a torque of 10

Nm ± 10%. Tighten negative pole screw (5) to a torque of 10 Nm ± 10%.