User Data; Reset; Service - Barco G62 User Manual

System menu

10.14 User Data

About user data
User can save the projector settings as user data and reload the settings later.
• Save All Settings: Save all of the projector settings as user data. User can save up to 5 records.
• Load All Settings: Load the previously saved user data.

10.15 Reset

About reset
Reset the projector settings to factory default values.
• Reset System Settings: Reset the settings of the system menu to factory default values.
• Reset All Settings: Reset all of the projector settings.
• Reset Selective: Reset the settings of one of the main menus. User can choose from INSTALLATION,
IMAGE, COMMUNICATION, and SYSTEM.

10.16 Service

About service
Input the service password to enter the service menu. In the Service menu, you can reset all settings to the
factory defaults, set filter index, phosphor index, view error log, total projector hours, light source hours, and
perform lens calibration.
72 R5914653 /02 G62