Exiting the Power Saver Mode
The following describes how to exit the Power Saver mode. The Power Saver mode is exited in
the following instances:
•
•
1. Press the Power Saver button.
Interface cables
When connecting to a network, use the Ethernet interface.
Using the Ethernet Interface
The Ethernet interface supports the following 2 types:
•
•
This section describes the installation procedure for the Ethernet interface.
1. Confirm that the power switch is turned off.
2. Connect a network cable to the Ethernet interface connector.
3. Switch on the machine.
Downloaded From ManualsPrinter.com Manuals
By pressing the Power Saver button
Receiving Print Data
100Base-TX
10Base-T
Note
Prepare a network cable suitable for your network connection. When changing the network
cable, consult the appropriate personnel.
Power Saver
button
Xerox 4112/4127 Copier/Printer
System Administration Guide
Product Overview
1-15