System Administrator Overview; Entering The System Administrator Mode - Xerox Versant 2100 Press System Administration Manual

System Administrator
Overview
This guide is a reference for system administrators and describes the functionality
available to the administrator only.
Enter the System Administrator mode to configure the system network and proxy server
information, change press settings such as feature defaults, and manage accounts.

Entering the System Administrator Mode

Once you are in Admin mode, you can change the system settings for the press by
selecting the Tools button.
1. Press the Log In/Out button.
2. Enter the System Administrator Login ID with the numeric keypad, and select Enter.
Note
The default Login ID value is admin. When using the Authentication feature, a
password is also required. The default password is 1111. It is recommended that you
change the default password as soon as possible after installing the press to prevent
unauthorized access to the administrator mode.
Note
By default, the password prompt is not enabled.
3. To access system functions, press the Tools button on the Control Panel.
4. To change settings, press the Tools icon on the screen.
5. Select the appropriate Mode, Group, and Feature.
Xerox ® Versant 2100 Press
System Administration Guide
1
1-1