Adjusting Height Of Backrest Tube; Adjusting Seat Tilt; Adjusting Seat Tilt On A Seat With Manual Tilt Module; Adjusting Seat Depth - Invacare Storm4 Series Service Manual

4.4.3 Adjusting Height of Backrest Tube

1. Loosen handscrews on both sides.
2. Adjust backrest tube to desired height.
3. Re-tighten handscrews.

4.5 Adjusting seat tilt

4.5.1 Adjusting Seat Tilt on a Seat With Manual Tilt Module

CAUTION!
Risk of crushing
Seat and frame are very heavy and can fall down without warning if seat tilt adjustment assembly is screwed
apart too far. Risk of injury to hands and feet.
– Only change adjustments when nobody is seated in chair.
– Only change tilt adjustment to where distance between axles is a maximum of 300 mm.
• 19 mm wrench
• Measuring tape
1. Apply wrench to bolt (1) of tilt adjustment.
2. Turn tilt adjustment till desired angle is attained or
distance between bolts is a maximum of 300 mm.

4.6 Adjusting Seat Depth

See corresponding user manual.
1555830-C
Fig. 4-5
Fig. 4-6
Setup
11