8.5.2
Adjusting seat tilt without tilt module
CAUTION: Danger of crushing!
• The seat/seat support are very heavy. You should seek help from a second person who can
secure the seat and help when carrying.
Requirements:
• 6 mm Allen key
nd
•
Let a 2
sure not to crush your fingers or other parts of the body.
•
Loosen and remove the two Allen screws (3) with a 6 mm Allen key.
•
Tilt the seat to the desired gradient.
•
Place the two parts of the strut on top of each other.
•
Refit the Allen screws and tighten them.
•
To conclude, check all the mobility aid functions.
•
74
person hold on to the seat. Please take into account that the seat is very heavy. Be