Figure 152. Guest User Configuration Window - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
[Web Authentication Method Configuration]
To configure the web authentication method used for guest authentication, execute the
command as follows:

security captive-portal web-auth auth-type [FLAG]

security captive-portal web-auth redirect-url [URL]
Parameter
FLAG
URL
[Retrieving Guest Access Configuration]
To retrieve the configured environment, execute the following command.

show security captive-portal config

show security captive-portal guest

show security captive-portal web-auth
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security>  <CaptivePortal>  <Guest Users> menu in the sub-menus.
Operator can check and delete a guest created in the <Guest Users> menu.
© SAMSUNG Electronics Co., Ltd.
3.0
Web Authentication Method
- internal: Uses the internal authentication page.
- external: Uses the authentication page of an external web server.
- downloaded: Uses the authentication page downloaded from the system.
- customized: Uses the authentication page created through configuration.
Address of an external authentication server

Figure 152. Guest User Configuration Window

Figure 153. Guest User List Window
CHAPTER 8. Security
Description
page 303 of 496