Figure 59. Ap Groups Configuration - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
3) Add or delete an AP to or from the AP group. Use 'no' parameter in front of the
command to delete an AP from the AP group. But, for a default AP group, you cannot
delete an AP from the group. If you delete an AP from other AP groups other than the
default group, the deleted AP is included into the default AP group.

add-ap [AP_NAME]

no add-ap [AP_NAME]
4) Use the 'show ap-group summary' command to check the AP group information.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. It provides the group configuration of the AP.
Click the <Add> or <Delete> button to add or delete a group.
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 59. AP groups configuration

CHAPTER 4. AP Connection Management
page 139 of 496