File Management - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.

10.11 File Management

The APC provides the file management functions of copying, moving, or retrieving a file
and also file download and upload. In addition, it checks the integrity of a package file and
provides version retrieving method.
To use a file related command, go to the file mode first. The command is basically used as
follows:
1) Go to the file mode of CLI.
WEC8500# file
WEC8500/file#
2) Use each command. The following commands are used in the file mode.
Command
cd
copy
df
download
dump
ls
move
pwd
remove
upload
verify
version
10.11.1 Retrieving Configuration of Current Directory
The file management command supports both a relative path and an absolute path based on
the current (working) directory. The current directory is a path that is a reference of a
relative path. For example, if the current directory is 'disk:/', the 'copy test1 test2' is the
same as the 'copy disk:/test1 disk:/test2' command.
To retrieve a current directory, enter the 'pwd' command.
WEC8500/file# pwd
disk:/
© SAMSUNG Electronics Co., Ltd.
3.0
Changes the current directory.
Copies a file.
Retrieves the brief information of a storage media connected to the system.
Downloads a file using FTP protocol.
Shows the content of a file.
Retrieves the list of files or directories in a specified path.
Changes the name of a file.
Shows the current directory.
Deletes a file.
Uploads a file using FTP protocol.
Checks the integrity of a package file and shows the result.
Shows the information of a package file.
CHAPTER 10. System Management
Description
page 365 of 496