2600-00FK1RGA4
Ver.
2.1.3
APC Management Port Configuration
To connect to the APC remotely using telnet/SSH or web, it is necessary to set up an IP
address to the management port.
Set up the management port as follows:
1) Go to configure 'mgmt0' interface configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# interface mgmt0
2) Set up an IP address.
WEC8500/configure/interface mgmt0# ip address 100.100.100.1/24
2.1.4
SNMP Community Configuration
To connect to the web server of APC, it is necessary to add Simple Network Management
Protocol (SNMP) community through CLI. For more information, see '10.1 SNMP
Configuration'.
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 2. Basic System Configuration
page 37 of 496