System Reboot - Samsung WEC8500 Operation Manual
Access point controller
Hide thumbs
Also See for WEC8500:
- Operation manual (689 pages) ,
- Maintenance manual (88 pages) ,
- Operation manual (680 pages)
Table of Contents
Advertisement
2600-00FK1RGA4
Ver.
10.2.2 System Reboot
There is a command that can reboot the system. Rebooting can be reserved and you can
cancel or retrieve the reservation.
Configuration using CLI
Use the 'reboot' command to reboot the system.
WEC8500# reboot
Use the 'reboot in HH:MM:SS' command to reserve system reboot. Once the reservation is
completed, the system is rebooted after a specified time (HH:MM:SS).
WEC8500# reboot in 12:00:00
Do you want to save the configuration? (y/n): y
Do you want to restart the system? (y/n): y
Notice: The system WILL reboot in 12:00:00.
WEC8500# show reboot schedule
The reboot has scheduled in 11:58:41.
To cancel the reservation, enter the 'no reboot' command.
WEC8500# no reboot
Configuration using Web UI
To configure a reboot related function, in the menu bar of <WEC Main window>, select
<Administrator> and then select the <Reboot> menu in the sub-menus.
The Reboot window is shown below.
[APC]
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 174. Reboot (APC)
CHAPTER 10. System Management
page 335 of 496
Advertisement
Chapters
Table of Contents
