Figure 160. Nat Configuration (1) - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
3) Configure a NAT rule using a static IP (A port can be also specified for DNAT).
WEC8500/configure# ip nat outside destination static tcp 10.10.10.1
4300 30.30.30.2 23
[Checking NAT Configuration]
To check the created NAT, use the following command.
WEC8500/configure# show nat
Configuration using Web UI
1) In the menu bar of <WEC Main window>, select <Configuration> and then select
the <Security>  <NAT>  <Pool> menu in the sub-menus. Click the <Add>
button and configure the NAT pool.
2) Click the <Add> button in the Translation Rule window and configure the Translation
Rule. Select NAT TYPE as either SNAT or DANT. Select STATIC checkbox to
configure Static and configure the values of Original IP Addr: Port and Translated IP
Addr: Port.
To proceed with NAT configuration, you must create an access list first.
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 160. NAT configuration (1)

Figure 161. NAT configuration (2)
CHAPTER 8. Security
page 312 of 496