Figure 123. Configuring Connection Limitation Per Wlan - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
4) Enable the WLAN.
APC/configure/wlan 1# enable
5) To check the configured connection limitation, use the 'show wlan detail' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <General> menu in the sub-menus.
After configuring MAXIMUM CONNECTIONS, click the <Apply> button.
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 123. Configuring connection limitation per WLAN

CHAPTER 7. WLAN Additional Services
page 262 of 496