Voice Optimization Configuration - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
6.2.4

Voice Optimization Configuration

The APC configures an EDCA parameter value that is optimized for voice service to an AP
in real-time.
Configuration using CLI
1) Go to configure  radio cvo mode to configure of CLI.
APC# configure terminal
APC/configure# [80211a|80211bg] cvo
APC/configure/80211a/cvo#
2) Enable or disable the function.

[no] enable
3) To check the configured information, use the 'show 80211a cvo config' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <General> menu in the sub-menus.
To enable Controlled Voice Optimization (CVO), select Enable in the CONTROLLED
VOICE OPTIMIZATION. To disable it, select Disable.
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 106. Configuring voice optimization
CHAPTER 6. Wi-Fi Configuration
page 220 of 496