Figure 88. Dynamic Wep Configuration Window - Samsung WEC8500 Operation Manual

Access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

2600-00FK1RGA4

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Configuration> and then select the

<WLANs> menu in the sub-menus.

1) Select a WLAN ID to change in the WLANs screen and go to the <Security> 

<Radius> tab. For details about configuration, refer to the section 8.1.

2) Click the <L2> tab.

Select the L2 Security Type as Dynamic WEP. After configuring the rest values as

required, click the <Apply> button.

For more information about detail configuration item of L2 tab, see '5.3.1

Initialization of WLAN Security Function'.

Figure 88. Dynamic WEP Configuration Window

CHAPTER 5. WLAN Management

page 188 of 496

Table of Contents