2600-00FK1RGA4
Ver.
4.2.7
AP Package Upgrade
Configuration using CLI (Upgrade Function)
To manage the AP upgrade function, execute the command as follows:
1) Go to configure AP configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# ap ap_1
2) Request the image file of an AP to upgrade.
WEC8500/configure/ap ap_1# upgrade-request weafama_1.2.4.R.bin
WARNING: AP will be upgrade.
Are you sure you want to continue? (y/n) : y
WEC8500/configure/ap ap_1#
3) To check the upgrade file information of the requested AP, use the following command.
WEC8500/configure/ap ap_1# show ap upgrade list
/* (RC/FR/RC) : RetryCount/FailReason/RebootCause
/* Pri
AP_ID
Model Version(config/current) Status(RC/FR/RC)
1
WEA302i
Configuration using CLI (Upgrade environment)
To configure AP upgrade related environment, the following command is provided.
First of all, go to the configure AP-all upgrade mode of CLI.
WEC8500# configure terminal
WEC8500/configure# ap-all
WEC8500/configure/ap-all# upgrade
WEC8500/configure/ap-all/upgrade#
© SAMSUNG Electronics Co., Ltd.
3.0
: VersionPriority (MD-model,A-AP config)
1.2.4.R/ 1.2.4.R
CHAPTER 4. AP Connection Management
Success( 0/ 0/146) AP
Pri force
No
page 158 of 496