2600-00FK1RGA4
Ver.
wlan-vlanId [WLAN_ID] [VLAN_ID]
Parameter
WLAN_ID
VLAN_ID
4) Operator can check the configuration information by executing the 'show remote-ap-
group summary', 'show wlan detail', 'show ap wlan-vlan [AP_PROFILE_NAME]'
command.
Configuration using Web UI
By referring to the 'Configuring Remote AP Group', add an AP to a remote AP group.
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <General> tab. After changing the 'CAPWAP TUNNEL MODE' to 'Local
Bridging', click the <Apply> button.
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> menu in the sub-menus. In the Access Points screen, select an AP to
change and go to the <Remote AP> tab. Select a WLAN that is configured as local
bridging, enter a VLAN ID, and click the <Apply> button.
© SAMSUNG Electronics Co., Ltd.
3.0
WLAN ID (Range: 1-240)
VLAN ID (Range: 1-4096)
Figure 81. Local Switching Configuration Window of WLAN
Figure 82. VLAN Configuration Window of WLAN Allocated to AP
CHAPTER 5. WLAN Management
Description
page 174 of 496