2600-00FK1RGA4
Ver.
8.5.2
Access List Configuration
Configuration using CLI
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create an access-list.
access-list fw [ACL_NAME] [ACTION] [SRC_ADDRESS (SRC_PORT)]
[DST_ADDRESS (DST_PORT)] [PROTOCOL]
Parameter
ACL_NAME
ACTION
SRC_ADDRESS(SRC_PORT)
DST_ADDRESS(DST_PORT)
PROTOCOL
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security> <Firewall> <<Policy> menu in the sub-menus. Click the <Add> button
to configure the firewall Policy.
© SAMSUNG Electronics Co., Ltd.
3.0
ACL name to configure
Action configuration (deny/permit)
Source IP address and port
Destination IP address and port
Protocol
Figure 159. Access-list configuration
CHAPTER 8. Security
Description
page 309 of 496