Figure 85. Wpa/Wpa2 802.1X Configuration (1) - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
10) After applying the changed configuration, exit the security configuration mode.
WEC8500/configure/wlan 1/security# apply
WEC8500/configure/wlan 1/security# exit
11) To check the configuration information, use the following command.
WEC8500/configure# show wlan security summary
12) To check configuration information, use the 'show wlan security summary' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus.
1) Select a WLAN ID to change in the WLANs screen and go to the <Security> 
<Radius> tab.
Item
PROFILE NAME
AUTHENTIC
ATION
SERVER
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 85. WPA/WPA2 802.1x Configuration (1)

A WLAN configuration name is displayed.
Enable/ Whether the authentication function is enabled.
Disable - Enable: The authentication function is enabled.
- Disable: The authentication function is disabled.
RADIUS Authentication server that will be used as the first priority
SERVER 1 (Can select one out of pre-configured RADIUS servers.)
RADIUS Authentication server that will be used as the second priority
SERVER 2 (Can select one out of pre-configured RADIUS servers.)
RADIUS Authentication server that will be used as the third priority
SERVER 3 (Can select one out of pre-configured RADIUS servers.)
CHAPTER 5. WLAN Management
Description
page 182 of 496