2600-00FK1RGA4
Ver.
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> AP <Advanced> menu in the sub-menus.
The setting options in the Advance tab are as follows. Fill in each item and click the
<Apply> button to apply the settings.
4.2.5.3 AP Mode Configuration
Configuration using CLI
To configure AP mode, execute the command as follows.
1) Go to configure AP configuration AP profile mode of CLI.
WEC8500# configure terminal
WEC8500/configure# ap ap_1
WEC8500/configure/ap ap_1# profile
WEC8500/configure/ap ap_1/profile#
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 67. AP Profile Setting (2)
CHAPTER 4. AP Connection Management
page 153 of 496