Figure 8. Wec8050 Interface-Front/Back; Figure 9. Status Led Configuration; Wec8050 Configuration And Functions - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
1.3.2

WEC8050 Configuration and Functions

The configuration and the purpose of each item of WEC8050 are as follows:
Ground hole
Status LED
This LED indicates the various statuses of system. Each LED displays the following
information.
LED
SYS Green
Orange
Red
FAN Green
Orange
Red
PWR Green
Off
© SAMSUNG Electronics Co., Ltd.
3.0
Status LED
Power

Figure 8. WEC8050 interface-Front/Back

Figure 9. Status LED configuration

Status
The system is operating normally
The system is now booting
Preparing the system for booting
The installed FAN module is operating normally
The system is now booting
Fan fault
The power is supplied normally
The power is turned off or not supplied
CHAPTER 1. Access Point Controller System Overview
Console Port Ethernet Port
Description
page 26 of 496