Figure 137. Monitored List Window To Manually Remove Wids - Samsung WEC8500 Operation Manual

Access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

2600-00FK1RGA4

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Monitor> and then select the

<Rogues>  <AP> menu in the sub-menus. And when the AP list is displayed, check a

desired MAC in the list and click the Remove button to manually remove an AP.

In addition, after going into the detail view screen by selecting one out of the AP list,

operator can also remove an AP by changing the REMOVE MANUALLY option to On.

1) In the Rogue AP list screen, operator can change the status of several APs to Remove

by using Remove.

2) If you change the setting of REMOVE MANUALLY to On in the Rogue AP detail

screen and click Apply, the AP status is changed to Remove.

Figure 138. Manual Remove Change Window in WIDS Monitored AP Detail Screen

Figure 137. Monitored List Window to Manually Remove WIDS

CHAPTER 8. Security

page 289 of 496

Table of Contents