Chapter 4. Ap Connection Management - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
CHAPTER 4.
Management
This chapter describes the various configuration methods to manage the connection
between the APC and AP.
4.1 APC Management
4.1.1 Managing APC List
To enable the APC system to provide the cluster or redundancy service, several APC
systems must be installed at a site and each APC must have the information of other APC
systems.
Therefore, the APC system provides the function of managing the list of APCs that will
provide the cluster or redundancy function. And the APCs added to the APC list are used
during cluster or redundancy configuration.
One APC system that will be saved in the APC list consists of an APC name and Medium
Access Control (MAC) information. For the MAC address of another APC system, enter
the MAC address retrieved from the Monitor  Summary  Inventory  MAC Address
menu of system WEC screen.
By default, its own system information is added to the APC list. For the APC, operator can
only change its name, but cannot delete it forcibly or change its MAC address.
The maximum number of APC systems that can be registered per model is as follows:
APC Model
WEC8500
WEC8050
© SAMSUNG Electronics Co., Ltd.
3.0
AP Connection
The maximum number of APC systems that can be registered

CHAPTER 4. AP Connection Management

12
2
page 125 of 496