Guest Connection Configuration - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. In the WLANs screen, select WLAN ID and enable
the <GUEST SERVICE> option.
Go to the <L3> of <Security> tab. Enable <WEB POLICY> and select Web Authentication.
8.3.2

Guest Connection Configuration

Configuration using CLI
By executing the 'security captive-portal' command, operator can configure various Guest
Access related options.
First of all, enter into the configuration mode to execute the command.
WEC8500# configure terminal
[Adding User]
To add a guest user, execute the command as follows:

security captive-portal add-user [ID] [PASSWD] [START_TIME] [END_TIME]
Parameter
ID
PASSWD
START_TIME
END_TIME
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 150. WLAN Guest Configuration Window
Figure 151. WLAN Web Policy Configuration Window
Login ID of a user
Password
start time (YYYY-MM-DD:HH:MM:SS format)
end time (YYYY-MM-DD:HH:MM:SS format)
CHAPTER 8. Security
Description
page 301 of 496