2600-00FK1RGA4
Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security> <AAA (Stations)> <RADIUS> menu in the sub-menus.
If you click the <Add> button in the RADIUS initial window, you can add a RADIUS
server.
The server addition window is shown below.
INDEX: ID that distinguishes RADIUS server configuration
TYPE: Selects a RADIUS server type
− Auth: Executes the authentication function
− Acct: Executes the accounting function
− Auth/Acct: Executes the authentication and accounting functions.
IP ADDRESS: IP address of a RADIUS server
SHARED SECRET FORMAT: Input format of a RADIUS server communication key
− ASCII: ASCII character string
− HEX: Hexadecimal value
SHARED SECRET: RADIUS server communication key
CONFIRM SHARED SECRET: Re-enter to check a RADIUS server communication key.
AUTH PORT NUMBER: Communication port number to authenticate a RADIUS
server (range: 1-65535, default: 1812)
ACCT PORT NUMBER: Communication port number to authenticate a RADIUS
server (range: 1-65535, default: 1813)
RETRANSMIT INTERVAL: Interval of RADIUS message re-transmission
(range: 1-60, default: 2, unit: s)
TOTAL RETRANSMIT: Maximum number of RADIUS message re-transmission
(range: 1-20, default: 10)
RETRANSMIT COUNT FAILOVER: Maximum number of re-transmission until the
RADIUS server failover is attempted (range: 1-10, default: 3, Must be less than the
TOTAL RETRANSMIT value)
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 129. RADIUS server configuration
CHAPTER 8. Security
page 276 of 496