Captive Portal - Samsung WEC8500 Operation Manual
Access point controller
Hide thumbs
Also See for WEC8500:
- Operation manual (689 pages) ,
- Maintenance manual (88 pages) ,
- Operation manual (673 pages)
Table of Contents
Advertisement
2600-00FK1RGA4
Ver.
8.3
Captive Portal
The W-EP wireless LAN system provides the Guest Access function. A guest user can
receive a limited service after connected to a specific WLAN (SSID) and going through
authentication.
8.3.1
WLAN Security Configuration
Configuration using CLI
To configure WLAN security for guest connection control, execute the command as follows:
1) Go to configure wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
2) Disable the WLAN.
WEC8500/configure/wlan 1# no enable
3) Configure the WEB policy (default: disabled).
WEC8500/configure/wlan 1/security/layer3# web-policy
4) Enable the WEB authentication (default: disabled)
WEC8500/configure/wlan 1/security/layer3# web-policy authentication
5) Configure a guest flag (default: disabled).
WEC8500/configure/wlan 1# guest-flag
6) Enable the WLAN.
WEC8500/configure/wlan 1# enable
7) To check the configured environment, use the 'show wlan security summary' command.
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 8. Security
page 300 of 496
Advertisement
Chapters
Table of Contents
