Ftp/Sftp - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
9.3

FTP/sFTP

The FTP is a network service for file transmission. The APC support the client and server
function for FTP and sFTP (Secure FTP).
Configuration using CLI
[SFTP Server Configuration]
The secure FTP server configuration is as follows:
1) Go to configure mode of CLI.
WEC8500# configure terminal
2) Enable or disable the sFTP server.

sftp-server enable: Enable

no sftp-server enable: Disable
3) Enter as follows to change a user's ID and password.

sftp-server chguser [ID] [PASSWORD]
Parameter
ID
PASSWORD
4) To check the status of sFTP server, enter the 'show sftp-server' command.
[FTP Server Configuration]
1) Go to configure mode of CLI.
WEC8500# configure terminal
2) Enable or disable the sFTP server.

ftp-server enable: Enable

no ftp-server enable: Disable
3) Enter as follows to change a user's ID and password.

ftp-server chguser [ID] [PASSWORD]
Parameter
ID
PASSWORD
4) To check the status of FTP server, enter the 'show ftp-server' command.
© SAMSUNG Electronics Co., Ltd.
3.0
User ID of a server
User password of a server
User ID of a server
User password of a server
CHAPTER 9. IP Application
Description
Description
page 322 of 496