Samsung WEC8500 Operation Manual page 171

2600-00FK1RGA4 Ver.
[Changing to Root AP]
The procedure of changing a W-EP AP to a Root AP is as follows:
1) Go to configure mode of CLI.
WEC8500# configure terminal
2) Check the registered AP list.
WEC8500/configure# show ap summary
3) Go to AP configuration mode to change to a Root AP.
WEC8500/configure# ap ap_1
4) Configure it to a Root AP.
WEC8500/ configure/ap ap_1# profile ap-mode rootAp
5) Restart the configured AP.
[Changing to Repeater AP]
The procedure of changing a W-EP AP to a Repeater AP is as follows:
1) Go to configure mode of CLI..
WEC8500# configure terminal
2) Check the registered AP list.
WEC8500/configure# show ap summary
3) Go to AP configuration mode of an AP that will be changed to a Repeater AP.
WEC8500/configure# ap ap_2
4) Configure it to a Repeat AP.
WEC8500/configure/ap ap_2# profile ap-mode repeaterAp
5) Restart the configured AP.
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 5. WLAN Management
page 171 of 496