Figure 141. Configuration Window For Wids Channel Validation - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Rogues>  <Channel Validation> menu in the sub-menus. And then, operator can
configure the SERVICE STATE and Valid Channel List in the screen.
Operator can change configuration after changing the SERVICE STATE and Valid Channel
List and clicking Apply.
8.2.2.8 Configuring and Searching Black/White List
Operator can configure black-list / white-list to distinguish authorized and unauthorized
APs/stations. The administrator configurable lists include <AP black-list, Station black-list,
Organizationally Unique Identifier (OUI) white-list, SSID white-list, Friendly white-list>.
The <AP white-list, Station white-list> are automatically configured and can be used only
for search.
Configuration using CLI
1) Go to the configure->wids configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wids
2) Configure the AP black-list.

ap-blacklist [MAC]
Parameter
© SAMSUNG Electronics Co., Ltd.
3.0

Figure 141. Configuration Window for WIDS Channel Validation

MAC
Description
MAC address that will be used as AP black-list
CHAPTER 8. Security
page 294 of 496