2600-00FK1RGA4
Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Rogues> <Policy> <Static Rule> menu in the sub-menus. And then, operator can
change the setting by selecting <Station> at the upper tab and clicking Apply.
In the configuration screen, operator can check Option and click Apply for configuration.
Figure 140. Configuration Window for WIDS Unauthorized Station Detection Option
8.2.2.7
Unauthorized Channel Validation Configuration
The unauthorized channel validation function helps an operator detect an AP that uses an
unauthorized channel other than configured channels. The configuration procedure is as
follows:
Configuration using CLI
1) Go to configure wids channel-validation configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wids
WEC8500/configure/wids# channel-validation
2) Enable the unauthorized channel validation function.
WEC8500/configure/wids/channel-validation# enable
3) Configure an authorized channel.
add [CHANNEL]
Parameter
CHANNEL
4) To check the changed configuration, execute the following command.
show wids current-config
© SAMSUNG Electronics Co., Ltd.
3.0
Description
Authorized channel number (e.g. add 2, 3, 4)
CHAPTER 8. Security
page 293 of 496