Connection Limitation Per Wlan - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <General> menu in the sub-menus.
After configuring MAX CLIENT COUNTS, click the <Apply> button.

7.10.2 Connection Limitation per WLAN

Configuration using CLI
To configure connection limitation per WLAN, execute the command as follows:
1) Go to configure  wlan configuration mode of CLI.
APC# configure terminal
APC/configure# wlan 1
APC/configure/wlan 1#
2) Disable the WLAN.
APC/configure/wlan 1# no enable
3) Configure connection limitation.
max-associated-stations [MAX-STATION]
Parameter
MAX-STATION
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 122. Configuring connection limitation per radio
Maximum number of wireless terminals that can be connected (default: 127)
CHAPTER 7. WLAN Additional Services
Description
page 261 of 496