2600-00FK1RGA4
Ver.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security> <Access Control Lists> <IP ACL> menu in the sub-menus.
The initial window of ACL rule configuration is shown below. When you click the <Add>
or <Delete> button, you can add or delete ACL rule.
To change the configuration of ACL rule, click ACLNAME to change. You can change the
configuration using the <Add> or <Delete> button. In addition, if there is a time profile in
an ACL name, the IP ALC window is changed as shown below. After selecting a time
profile, click the <Apply> button to apply the time profile to the ACL.
© SAMSUNG Electronics Co., Ltd.
3.0
Figure 36. ACL Configuration Window
Figure 37. Window where a Time Profile is Applied to ACL
CHAPTER 3. Data Network Function
page 107 of 496