Mac Filter - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
8.6

MAC Filter

The W-EP wireless LAN system provides the MAC filter function. A user may experience
connection restriction due to MAC filtering when connecting to a specific WLAN (SSID).
Configuration using CLI
To configure a MAC list for connection control by the MAC filter, execute the command as
follows:
1) Go to configure  security configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# security
2) Creates a MAC filter list.
WEC8500/configure/security# mac-filter [ID]
Parameter
3) Configure the filtering policy.
WEC8500/configure/security/mac-filter 1# policy [POLICY]
Parameter
POLICY
4) Configure a MAC entry.
WEC8500/configure/security/mac-filter 1# mac [MAC_ADDRESS]
Parameter
MAC_ADDRESS
5) Apply the MAC filter to the WLAN by entering the created WLAN ID.
WEC8500/configure/security/mac-filter 1# wlan_id <WLAN_ID>
© SAMSUNG Electronics Co., Ltd.
3.0
ID
Description
MAC filter list table ID (range: 1-16)
Description
Table policy of MAC filtering list (default: deny)
Description
MAC address to block (XX:XX:XX:XX:XX:XX format)
CHAPTER 8. Security
page 313 of 496