Samsung WEC8500 Operation Manual page 94

2600-00FK1RGA4 Ver.
3.4.5.9 Summary Configuration
Configuration using CLI
WEC8500/configure/router/ospf 2# summary-address ?
A.B.C.D/M
WEC8500/configure/router/ospf 2# summary-address 1.1.1.1/16 ?
not-advertise
tag
<cr>
WEC8500/configure/router/ospf 2# summary-address 1.1.1.1/16
WEC8500/configure/router/ospf 2#
Parameter
summary-address
Operator can perform detail configuration only when you enter a summary-address.
The detail configuration includes advertise or TAG configuration.
1) Advertise Configuration
The default is set to Enable. Therefore, if no-advertise is selected in the CLI, the
configuration is changed to Disable.
2) Tag
A tag is a user-defined 32-bit tag value between 0 and 4294967295. A tag also has a
default value and it is 0.
WEC8500/configure/router/ospf 2# summary-address 11.1.1.1/16
WEC8500/configure/router/ospf 2# summary-address 11.1.1.1/16 tag ?
0 - 4294967295
WEC8500/configure/router/ospf 2# summary-address 11.1.1.1/16 tag 3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <Summary> menu in the sub-menus.
The configuration page is as follows:
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 3. Data Network Function
IP summary prefix
Suppress routes that match the prefix
Set tag
Description
A.B.C.D/M
32-bit tag value
page 94 of 496