Samsung WEC8500 Operation Manual page 95

2600-00FK1RGA4 Ver.
After default configuration, select a PROCESS ID for detail configuration.
The detail configuration includes advertise and TAG configuration mentioned in the CLI.
Unlike CLI, there is no no-advertise. A user can change the default Enable to Disable.
3.4.5.10 Passive Interface Configuration
Configuration using CLI
WEC8500/configure/router/ospf 2# passive-interface ?
<WORD>
WEC8500/configure/router/ospf 2# passive-interface ge2 ?
A.B.C.D
<cr>
Parameter
Interface Name
A user directly enters an interface name for Passive-interface configuration. Also, a user
can enter an address to the interface.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <Passive Interface> menu in the sub-menus.
The configuration page is as follows:
© SAMSUNG Electronics Co., Ltd.
3.0
CHAPTER 3. Data Network Function
Interface's name
Address of interface
Description
Enter the name of an interface to use directly.
page 95 of 496