Table of Contents
Advertisement
SAMSUNG IPX-G5X0 Installation Manual v1.0
Gateway Configuration
In the SCM Administrator configure a new gateway at:
[Configuration> Gateway> IPX Setting> Gateway Configuration]
Basic Configuration tab
Enter the Profile Login ID, which should be the same as the Gateway Name. Then enter the Profile
Login Passcode (samsung*# by default). You don't need to enter any IP addresses here. These fields are
not needed for this implementation.
Slot Configuration
There are 4 slots on the back of the gateway. This tells the SCM what is configured on each slot. On
the left side of the slot configuration tab, enter the slot and expansion configuration of the gateway.
Select the option cards and expansion cabinets installed in the gateway. After the installation is
complete, the actual states of slots and expansions will be updated on the right side.
Mar 2016
8
Hide quick links:
Advertisement
Table of Contents
