Introduction - Samsung WEC8500 Operation Manual

Access point controller
Hide thumbs Also See for WEC8500:
Table of Contents

Advertisement

2600-00FK1RGA4
Ver.

INTRODUCTION

Purpose
This manual describes the overview, management, and setup of WEC8500/WEC8050 that
is a Samsung Wireless Enterprise (W-EP) Access Point Controller (APC). This manual is
written for WEC8500 version 1.4.4, WEC8050 version 1.0.0.
Document Content and Organization
This manual consists of ten Chapters, three Annexes, and a list of Abbreviations.
CHAPTER 1. APC System Overview
Describes the main functions, network configuration, external configuration and service
scenario of APC.
CHAPTER 2. Basic System Configuration
Describes how to configure to use Command Line Interface (CLI) and Web UI.
CHAPTER 3. Data Network Function
Describes how to set up the data network such as interface, Virtual Local Area Network
(VLAN), L3, or Quality of Service (QoS), etc. of APC.
CHAPTER 4. AP Connection Management
Describes the connection management function of APC and Samsung W-EP wireless LAN
Access Point (AP).
CHAPTER 5. WLAN Management
Describes how to set up the Wireless Local Area Network (WLAN) of APC.
CHAPTER 6. Wi-Fi Configuration
Describes how to configure the Wireless Fidelity (Wi-Fi) of APC, QoS, and country code.
© SAMSUNG Electronics Co., Ltd.
3.0
INTRODUCTION
page 3 of 496

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wec8050

Table of Contents