2600-00FK1RGA4
Ver.
1.3
APC Configuration and Functions
1.3.1
WEC8500 Configuration and Functions
The Configuration and the purpose of each item of WEC8500 are as follows:
System LED
Ground hole
System LED
Indicates the various statuses of system. Each LED displays the following information.
LED
SYS
FAN (fan
module)
PS1 (power
module 1)
PS2 (power
module 2)
© SAMSUNG Electronics Co., Ltd.
3.0
Console port
Management port
Figure 3. WEC8500 Interface-Front/Back
Figure 4. System LED Configuration
Status
Green
System is operating normally
Orange
During system booting
Red
Preparing for system booting
Green
Installed fan module is operating normally
Orange
During system booting
Red
Fan module fault has occurred
Green
Normal operation of installed power module 1
Red
Power is turned off or a fault occurred while the power module 1 is installed.
Off
Power module 1 is not installed.
Green
Normal operation of installed power module 2
Red
Power is turned off or a fault occurred while the power module 2 is installed.
Off
Power module 2 is not installed.
CHAPTER 1. Access Point Controller System Overview
1G Optic port
10G Optic port
Description
USB port
Power Module
page 22 of 496