Interference Type Configuration - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
7.6.3

Interference Type Configuration

The interference type of 2.4 GHz or 5 GHz that can be detected by the W-EP wireless LAN
is shown below.
Wireless bandwidth
2.4 GHz
5 GHz
To configure an interference type, execute the command as follows:
1) Go to configure mode of CLI.
APC# configure terminal
APC/configure#
2) Configure an interference type. The default value of all the interference types is
'enabled'.

interferer 80211b zigbee: 2.4 GHz configuration

interferer 80211a cordless_phone: 5 GHz configuration
© SAMSUNG Electronics Co., Ltd.
3.0
continuous_transmitter, cordless_phone, video_camera
bluetooth, continuous_transmitter, cordless_phone, microwave_oven,
video_camera, zigbee
CHAPTER 7. WLAN Additional Services
Interference type
page 251 of 496