Samsung WEC8500 Operation Manual page 118

2600-00FK1RGA4 Ver.
3) Check the settings by using the 'show OS-AWARE-all' or 'show OS-AWARE-
[OS_AWARE NAME]' commands.
'show OS-AWARE-all' retrieves all OS-AWARE information and 'show OS-AWARE-
[OS_AWARE NAME]' only retrieves user defined information out of all OS-AWARE
information.
======================================================================
=========================
PLD_INDEX
======================================================================
=========================
1
3.5.6.2 Applying to ACL
Configuration using CLI
1) Go to configure  fqm mode to set the ACL rule of CLI.
APC# configure terminal
APC/configure# fqm-mode
2) Apply the OS-AWARE to ACL. Use the 'no' parameter to delete the OS-AWARE

access-list [ip/ipv6/mac] [ACL_NAME] [deny/permit/time-profile] seq [seq_NUM]
[1/*/ahp/eigrp/esp/gre/icmp/igmp/igrp/ip/nos/ospf/pcp/pim/17/6/tcp/udp/1-255]
[any/A.B.C.D A.B.C.D] eq [eq_VALUE] [any/A.B.C.D A.B.C.D] eq [eq_VALUE]
os-aware[OS_AWARE NAME] [[[dscp [*|[0-63]]|precedence [*|[0-7])]]]|]

no access-list [ip/ipv6/mac] [ACL_NAME] [deny/permit/time-profile] seq
[seq_NUM] [1/*/ahp/eigrp/esp/gre/icmp/igmp/igrp/ip/nos/ospf/pcp/pim/17/6/tcp/
udp/1-255] [any/A.B.C.D A.B.C.D] eq [eq_VALUE] [any/A.B.C.D A.B.C.D] eq
[eq_VALUE] os-aware[OS_AWARE NAME] [[[dscp [*|[0-63]]|precedence [*|[0-
7])]]]|]
Parameter
OS_AWARE NAME
An example of applying 'window7' to 'acl' is as follows.
APC# configure terminal
APC/configure# fqm-mode
access-list ip acl1 permit seq 1 icmp any any os-aware window7
3) To check the configuration information, use the 'show running-config network'
command.
© SAMSUNG Electronics Co., Ltd.
3.0
OS_NAME TYPE
window7 0
CHAPTER 3. Data Network Function
REFCNT OPTION LENGTH
0 5
Description
os-aware name to configure
FINGERPRINT
2 1234
page 118 of 496