Figure 94. Option 82 Configuration (1) - Samsung WEC8500 Operation Manual

Access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

2600-00FK1RGA4

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Configuration> and then select the

<Controller>  <Interfaces> menu in the sub-menus. In the interface, you can see the

page where you can change the Option 82.

Select an item in the list and perform detail configuration.

After unchecking the GLOBAL USE check box in the DHCP part, configure OPTION 82

STATE and OPTION 82 TYPE and then click the <Apply> button.

In the OPTION 82 STATE, configure Enable/Disable for Option 82 and configure ap-mac,

ap-mac-ssid, or ap-ethermac for OPTION 82 TYPE.

Figure 94. Option 82 configuration (1)

Figure 95. Option 82 configuration (2)

CHAPTER 5. WLAN Management

page 200 of 496

Table of Contents