Figure 54. Apc List Management Window - Samsung WEC8500 Operation Manual

2600-00FK1RGA4 Ver.
Configuration using CLI
The procedures for configuration are as follows.
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure# apc
WEC8500/configure/apc/apc-list#
2) Go to the apc-list item of CLI.
WEC8500/configure# apc
WEC8500/configure/apc/apc-list#
3) Add, delete or change APC.

add-apc [APC_NAME] [MAC_ADDRESS]

del-apc [APC_NAME]

change-apc [CURRENT_APC_NAME] [NEW_APC_NAME]

change-mac [APC_NAME] [MAC_ADDRESS]
Parameter
APC_NAME
CURRENT_APC_NAME
NEW_APC_NAME
IP_ADDRESS
4) To check the configured APC list, execute the 'show apc-list' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <APC Lists> menu in the sub-menus. Operator can add a new APC by
clicking the Add button in the figure.
© SAMSUNG Electronics Co., Ltd.
3.0
APC name
Current APC name (before change)
APC name after change
APC MAC address (xx:xx:xx:xx:xx:xx)
In the APC system, enter the system mac address output parameter
value of 'show system info' command.)

Figure 54. APC List Management Window

CHAPTER 4. AP Connection Management
Description
page 126 of 496