Yamaha RX10LTGTYL Service Manual page 924

Parts to be tightened Parts to be tightened
Wheel bracket shaft and sliding frame
Set bolt (front axle)
Speed sensor
Gear unit (speed sensor)
Bearing nut
NOTE:
Tightening steps:
1. Tighten the bolt to a torque at 120 Nm (12.0 mSkg, 85 ftSlb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 mSkg, 43 ftSlb).
TIGHTENING TORQUE
Tightening torque
Nm mSkg ftSlb
72 7.2 52
9 0.9 6.5
20 2.0 14
40 4.0 29
55 5.5 40
57
SPEC
Remarks Remarks

Apply LOCTITE