Yamaha RX10LTGTYL Service Manual page 1213

PRIMARY SHEAVE AND DRIVE V-BELT
4-5
INSPECTION
1. Inspect:
S Spider 1
S Sliding sheave 2
S Fixed sheave 3
S Primary sheave cap 4
Cracks/damage ! Replace.
2. Inspect:
S Primary sheave spring 1
Cracks/damage ! Replace.
3. Measure:
S Primary sheave spring free length a
Out of specification ! Replace the primary
sheave spring.
Primary sheave spring free length:
RX10, RX10S, RX10R, RX10RS:
87.4 mm (3.44 in)
RX10M, RX10MS:
84.2 mm (3.32 in)
NOTE:
When changing the primary sheave springs, re-
fer to "GEAR SELECTION" in CHAPTER 2.
4. Inspect:
S Primary sheave cap bush 1
S Sliding sheave bush 2
Cracks/damage ! Replace.
Clutch bushing press:
YS-42424
POWR
TR