Yamaha RX10LTGTYL Service Manual page 675

DRIVE CHAIN HOUSING
4. Install:
S Shift rod 1
5. Adjust:
S Shift rod length a
Adjustment steps:
S Move the shift lever to the "FWD." position.
S Loosen the locknuts 2 .
S Turn the shift rod 1 so that shift rod free play
is 0 mm (in direction where a can be short-
ened appropriately) and then turn back the
shift rod 1/4 turns.
S Tighten the locknuts.
6. Fill:
S Drive chain housing oil
Refer to "DRIVE CHAIN" in CHAPTER 2.
7. Adjust:
S Drive chain slack
Refer to "DRIVE CHAIN" in CHAPTER 2.
26
POWR
TR