Yamaha RX10LTGTYL Service Manual page 1371

A.C. MAGNETO AND STARTER CLUTCH
REMOVAL
1. Remove:
S A.C. magneto rotor bolt
S Washer
NOTE:
S While holding the A.C. magneto rotor 1 with
the sheave holder 2 , loosen the magneto ro-
tor bolt.
S Do not allow the sheave holder to touch the
projection on the A.C. magneto rotor.
Sheave holder:
90890-01701, YS-01880
2. Remove:
S A.C. magneto rotor 1
(with the rotor holding puller 2 and rotor
holding puller attachment)
S Woodruff key
CAUTION:
To protect the end of the crankshaft, place
an appropriate sized socket between the ro-
tor holding puller set's center bolt and the
crankshaft.
NOTE:
Make sure the rotor holding puller is centered
over the A.C. magneto rotor.
Rotor holding puller:
90890-01362, YU-33270
Flywheel puller attachment
90890-04089, YM-33282
5-33
ENG