Yamaha RX10LTGTYL Service Manual page 877

SECONDARYSHAFT
INSPECTION
1. Inspect:
S Secondary shaft 1
Scratches (excessive)/damage ! Replace.
S Splines 2
Wear/damage ! Replace the secondary
shaft.
S Bearing contact surface 3
Scratches/wear/damage ! Replace the
secondary shaft.
2. Inspect:
S Bearing 1
Pitting/damage ! Replace.
NOTE:
When install the bearing 1 , larger side of the in-
ner race 2 is outside of the frame.
3. Inspect:
S Bearing collar nut 1
Cracks/damage ! Replace.
S Collar 2
Cracks/damage ! Replace.
4. Measure:
S Brake disc thickness a
Out of specification ! Replace.
Minimum thickness:
5.0 mm (0.20 in)
Measuring point: 1 X 3 mm (0.04 X 0.12 in)
from the edge of the brake disc.
25
POWR
TR