Yamaha RX10LTGTYL Service Manual page 510

CONTROL ROD ADJUSTMENT (For RXW10GTW)
CONTROL ROD ADJUSTMENT
(For RXW10GTW)
Control rod stroke
1. Loosen the locknut
2. Check the adjusting rod length using the
scale on the special wrench
the owner's tool kit.
3. Turn the adjusting rod
to adjust the control rod stroke.
Adjusting
MIN
position
Decrease
Effect
pitching
Standard
4. While holding the adjusting rod
tighten the locknut
Locknut:
35 Nm (3.5 m•kg, 25 ft•lb)
21
INSP
ADJ
.
included in
in direction or
STD MAX
Increase
← →
weight
transfer
STD
securely,
.