Yamaha RX10LTGTYL Service Manual page 504

REAR SUSPENSION STOPPER BAND TENSION
REAR SUSPENSION STOPPER BAND
TENSION
1. Loosen the stopper band nut
2. Adjust the stopper band tension by chang-
ing the position of the hole of
CAUTION:
Make sure the left and right sides of the
rear suspension stopper band are adjusted
evenly. (Except for RXW10GTW)
NOTE: NOTE:
This adjustment affects the handling character-
istics of the machine.
Adjuster For RXW10GTW:
Thread
Length
Except for RXW10GTW:
Longer
(Maximum)
Effects Less weight
on skis.
More weight
transfer
3. Tighten the stopper band nut.
Stopper band nut:
4 Nm (0.4 m•kg, 2.9 ft•lb)
For RXW10GTW
Except for RXW10GTW
18
INSP
ADJ
~ or
← →
← →
Shorter
(Minimum)
More weight
on skis.
Less weight
transfer
.