Yamaha RX10LTGTYL Service Manual page 875

SECONDARYSHAFT SECONDARYSHAFT
REMOVAL
1. Remove:
S Drive chain housing parts
Refer to "DRIVE CHAIN HOUSING WITH
REVERSE MODEL" in CHAPTER 4
S Secondary sheave assembly
Refer to "SECONDARY SHEAVE" in CHAP-
TER 4
2. Install:
S Secondary shaft slide & holder 2
A Outside
B Inside
NOTE:
Do not use the collar 3 .
CAUTION:
Contact the secondary shaft slide & holder
only with the inner race of the bearing.
Secondar yshaft Slide & Holder
90890–01492, YU–01492
3. Remove:
S Bearing collar nut 1
NOTE:
Remove the bearing collar nut by ring nut
wrench 4 .
Ring nut wrench
90890–01268, YU–01268
4. Install:
S Secondary sheave mounting bolt 1 and
washer.
NOTE:
Use the secondary sheave mounting bolt 1
and washer.
5. Tighten:
S Secondary sheave bolt 1
6. Remove
S Secondary shaft
24
POWR POWR
TR TR